- Home
- Acrylic glass
- Acrylic glass production
- Other plastics
- Other plastics production
- Vacuum moulding machines
- Used machines
- Vacuum moulding of plastics
- Plastics production technology
- Inquiry
- Contacts
- About company
- Sponsoring
- New training
and manufacturing zone - New training center
KOPLAST spol. s r.o.
Havlíčkovo náměstí 74
679 06 Jedovnice
Czech Republik
tel.: +420 516 428 500
fax: +420 516 428 501
VL1000
;)
| Technical parameters of VL1000 | |
|---|---|
| Plot size of the machine (l x w x h) | 2750 x 1550 x 2270 mm |
| Weight of the machine | 1.1 t |
| Type of drive | el. energy, compressed air adjusted up to 1 Mpa |
| Total input | 21.5 kW 35A |
| Input of heating panel - upper | 14.9 kW |
| Air pump SV 1040C | 1.25 kW |
| System | 3+N+PE, 400/230 V, 50 Hz |
| Inlet pressure | max. 1 MPa |
| Operating pressure | max. 0.7 - 0.9 MPa |
| Temperature of plastification | max. 220 °C |
| Machine operation | Manual/automatic |
| Size of work table | 910 x 910 mm (option of format change) |
| Max. size of plastic | 1000 x 1000 mm |
| Thickness of plastic | 0.3 to 5 mm |
| Max. rise of table | 400 mm |
| Regulation of heaters | digitally set, continuously adjustable, divided into 3 zones |
| Coverage | IP 30 |
| Environment | normal area AB - areas with protection against atmospheric impact with regulation +5 to +40 °C |
| Interval of supply voltage | 95 to 105 % of machine nominal voltage |
| Max. tolerance of frequency | (+), (-) 2% |
| Max. tolerance in place of operation | 70 dB |
2008 © Koplast s.r.o.
Notice